IMPORTANT NOTE FOR HANDLE PULL MODELS - Allowance should be made for the width of the bin to clear the door and hinge mechanisms. If hinges are used that do not allow the door to clear the opening fully, allow an extra 10mm width (check as this may vary). For top mounted models, installation also requires that the top door hinge be 150mm from the top of the door to allow clearance for the bin handle.

Recommended use: Waste & recycling solution. 2 x units can be installed within a standard 720mm carcass height, providing a 4 bin recycling solution.
Metal Gauge - 1.0mm zinc treated steel for strength and powder coated for durability.

*Bench Overhang Clearance - The KC30SCH has been designed with over extension drawer runners which allow for a bench overhang of up to 35mm, allowing the back bucket to come clear independent of the front bucket. If more bench overhang clearance is required, please mount the bin lower in the cabinet.

NZ Patent Number 530285
AUS Patent No: 2004240179

NOTE: The Hideaway Compact range is designed for residential use and is not recommended for commercial applications. Its use in this application will void the warranty.